Regulations for The Graduate Certificate in Science and Technology - GCertScTech

Official rules and regulations for the Graduate Certificate in Science and Technology. These regulations are for the 2024 intake to this qualification.

Looking for general study information or to apply?

Go to Graduate Certificate in Science and Technology – GCertScTech

Qualification Regulations

Part I

These regulations are to be read in conjunction with all other Statutes and Regulations of the University including General Regulations for Undergraduate Degrees, Undergraduate Diplomas, Undergraduate Certificates, Graduate Diplomas, and Graduate Certificates.

Part II

Admission

1. Admission to the Graduate Certificate in Science and Technology requires that the candidate will:

(a) meet the University admission requirements as specified; and

(b) have been awarded or qualified for a relevant Bachelor’s degree, or equivalent; or

(c) have been admitted to the qualification on the basis of equivalent relevant professional experience.

Qualification requirements

2. Candidates for the Graduate Certificate in Science and Technology shall follow a flexible programme of study, which shall consist of courses at 200, 300 and 700 level totalling at least 60 credits, comprising:

(a) at least 45 credits at 300 level or higher;

(b) a selection of courses from the Schedule for the Qualification;

and including:

(c) attendance at contact workshops, block courses, field trips, studios, workshops, tutorials, and laboratories as required.

Specialisations

3. The Graduate Certificate in Science and Technology may be awarded with or without an endorsement.

4. Candidates may complete an endorsement by passing 60 credits in an endorsement. The requirements for endorsements are set out in the Schedule for the Qualification.

5. The endorsement available in the Graduate Certificate in Science and Technology is Lighting.

Completion requirements

6. Any timeframes for completion as outlined in the General Regulations for Undergraduate Degrees, Undergraduate Diplomas, Undergraduate Certificates, Graduate Diplomas and Graduate Certificates will apply.

7. Candidates may be graduated when they meet the Admission, Qualification and Academic requirements within the prescribed timeframes.

Unsatisfactory academic progress

8. The general Unsatisfactory Academic Progress regulations will apply.

Schedule for the Graduate Certificate in Science and Technology

Course planning key

Prerequisites
Courses that need to be completed before moving onto a course at the next level. For example, a lot of 200-level courses have 100-level prerequisite courses.
Corequisites
Courses that must be completed at the same time as another course are known as corequisite courses.
Restrictions
Some courses are restricted against each other because their content is similar. This means you can only choose one of the offered courses to study and credit to your qualification.
Key terms for course planning
Courses
Each qualification has its own specific set of courses. Some universities call these papers. You enrol in courses after you get accepted into Massey.
Course code
Each course is numbered using 6 digits. The fourth number shows the level of the course. For example, in course 219206, the fourth number is a 2, so it is a 200-level course (usually studied in the second year of full-time study).
Credits
Each course is worth a number of credits. You combine courses (credits) to meet the total number of credits needed for your qualification.
Specialisations
Some qualifications let you choose what subject you'd like to specialise in. Your major or endorsement is what you will take the majority of your courses in.

Schedule A: Endorsement

Lighting (60 credits)

Course code: 218741 Light & Lighting 15 credits

This course considers photometric concepts and develops the principles of light control and distribution. Human visual processes are considered and colour science is introduced.

Restrictions: 140741

View full course details
Course code: 218742 Lamps and Luminaires 15 credits

This course develops the principles of light production as applied to lamps and considers the application of lamps in lighting design. The requirements for lamp control gear are considered together with the application of optical control to achieve accurate and efficient distribution of luminous flux. Methods of photometric testing of lamps and luminaires will be investigated.

Prerequisites: 218741 Restrictions: 140742

View full course details
Course code: 218743 Interior Lighting Design 15 credits

This course develops the principles of interior lighting design. The human requirements and statutory regulations are investigated. Lighting designs are undertaken to demonstrate the techniques involved. The utilisation of daylight to enhance lighting installations and assist with energy savings is considered. Creative lighting techniques are investigated.

Prerequisites: 218741, 218742

View full course details
Course code: 218744 Energy Efficient Lighting and Exterior Lighting Design 15 credits

This course considers the efficiency of lamps and luminaires in producing and distributing luminous flux. Lighting controls for energy saving applications are investigated. Principles of exterior lighting for work places are considered and the flood lighting of building facades is developed. The design of landscape lighting for commercial and public spaces is undertaken. The statutory requirements for, and the techniques associated with, road way and pedestrian lighting are considered. The design of lighting for sports grounds is undertaken.

Prerequisites: 218741, 218742, 218743 Restrictions: 140744

View full course details

Without Specialisation (60 credits)

Unendorsed schedule

60 credits from courses at 200 level and 300 level selected from the following prefixes:
112 Agribusiness, 117 Animal Science, 119 Agriculture and Horticulture, 120 Plant Biology, 121 Environmental Science, 122 Biochemistry, 123 Chemistry, 138 Agricultural Engineering, 141 Food Technology, 147 Rehabilitation Studies, 151 Nutritional Science,
157 Information Systems, 158 Information Technology, 159 Computer Science, 160 Mathematics, 161 Statistics, 162 Biology, 175 Psychology, 188 Natural Resource Management, 189 Soil Science, 194 Physiology, 196 Ecology, 199 Zoology, 203 Genetics,
214 Health Sciences, 218 Building and Construction, 228 Technology and Engineering, 231 Public Health, 233 Earth Science, 234 Sport and Exercise Science, 235 Māori Resource and Environmental Management, 246 Natural Sciences, 247 College of Sciences,
250 Health, 251 Occupational Health and Safety, 280 Process and Environmental Technology, 281 Electronics and Information Engineering, 282 Mechatronics and Automation Engineering, 283 Agronomy, 284 Horticulture, 285 Plant Health, 286 Equine.
Up to 15 credits may be selected from 127 Property Studies, 150 Māori Studies, 152 Management, 156 Marketing, 178 Economics.
or 60 credits from:
Course code: 502701 Workplace-based Learning in the Sciences 60 credits

Portfolio of study using technical and clinical experiences in the sciences

Prerequisites: Appropriate College approval (Director Academic)

View full course details
Course code: 502702 Extended Workplace-based Learning in the Sciences 60 credits

Portfolio of study using technical and clinical experiences in the sciences

Prerequisites: 502701 Appropriate College approval (Director Academic)

View full course details

Schedule B

60 credits from courses at 200 level and 300 level selected from the following prefixes:

112 Agribusiness, 117 Animal Science, 119 Agriculture and Horticulture, 120 Plant Biology, 121 Environmental Science, 122 Biochemistry, 123 Chemistry, 138 Agricultural Engineering, 141 Food Technology, 147 Rehabilitation Studies, 151 Nutritional Science,

157 Information Systems, 158 Information Technology, 159 Computer Science, 160 Mathematics, 161 Statistics, 162 Biology, 175 Psychology, 188 Natural Resource Management, 189 Soil Science, 194 Physiology, 196 Ecology, 199 Zoology, 203 Genetics,

214 Health Sciences, 218 Building and Construction, 228 Technology and Engineering, 231 Public Health, 233 Earth Science, 234 Sport and Exercise Science, 235 Māori Resource and Environmental Management, 246 Natural Sciences, 247 College of Sciences,

250 Health, 251 Occupational Health and Safety, 280 Process and Environmental Technology, 281 Electronics and Information Engineering, 282 Mechatronics and Automation Engineering, 283 Agronomy, 284 Horticulture, 285 Plant Health, 286 Equine.

Up to 15 credits may be selected from 127 Property Studies, 150 Māori Studies, 152 Management, 156 Marketing, 178 Economics.

or 60 credits from:

Course code: 502701 Workplace-based Learning in the Sciences 60 credits

Portfolio of study using technical and clinical experiences in the sciences

Prerequisites: Appropriate College approval (Director Academic)

View full course details
Course code: 502702 Extended Workplace-based Learning in the Sciences 60 credits

Portfolio of study using technical and clinical experiences in the sciences

Prerequisites: 502701 Appropriate College approval (Director Academic)

View full course details

Looking for a previous version of this regulation?