Dr Liqiong Tang staff profile picture

Contact details +64 (06) 356 9099  ext. 84148

Dr Liqiong Tang

Senior Lecturer

School of Engineering and Advanced Technology

Research Projects

Summary of Research Projects

Position Current Completed
Project Leader 5 8
Team Member 0 1

Research Outputs

Journal

Gui, P., Tang, L., & Mukhopadhyay, S. (2017). A NOVEL ROBOTIC TREE CLIMBING MECHANISM WITH ANTI-FALLING FUNCTIONALITY FOR TREE PRUNING. Journal of Mechanisms and Robotics (ASME). Retrieved from http://mechanismsrobotics.asmedigitalcollection.asme.org/journal.aspx
[Journal article]Authored by: Tang, L.
Tang, L., & Fukuoka, M. (2014). Wireless mechatronic sensing device for long tube internal deformation inspection. ECS Transactions. 64(1), 11-18
[Journal article]Authored by: Tang, L.
Kioumars, AH., & Tang, L. (2014). Wireless component-based health data acquisition and monitoring system. Proceedings of the 2014 9th IEEE Conference on Industrial Electronics and Applications, ICIEA 2014. , 1567-1572
[Journal article]Authored by: Tang, L.
Tang, L., & Abplanalp, P. (2014). GPS guided farm mapping and waypoint tracking mobile robotic system. Proceedings of the 2014 9th IEEE Conference on Industrial Electronics and Applications, ICIEA 2014. , 1676-1681
[Journal article]Authored by: Tang, L.
Tang, L., Bailey, D., & Jones, M. (2013). Rolling Prevention Mechanism for Underground Pipe Erosion Inspection Robot with a Real Time Vision System. International Journal of Intelligent Mechatronics and Robotics. 3(3), 60-76
[Journal article]Authored by: Tang, L.
Wang, J., Tang, L., & Bronlund, JE. (2013). Surface EMG signal amplification and filtering. International Journal of Computer Applications. 82(1), 1-22 Retrieved from http://www.ijcaonline.org/archives/volume82/number1/14079-2073
[Journal article]Authored by: Tang, L.
Tang, L., Bailey, D., & Jones, M. (2013). Rolling prevention mechanism for underground pipe erosion inspection robot with a real time vision system. International Journal of Intelligent Mechatronics and Robotics. 3(3), 60-76
[Journal article]Authored by: Bailey, D., Tang, L.
Corpe, SJO., Tang, L., & Abplanalp, P. (2013). GPS-guided modular design mobile robot platform for agricultural applications. Proceedings of the International Conference on Sensing Technology, ICST. , 806-810
[Journal article]Authored by: Tang, L.
Xiao, S., Wu, S., Tang, L., Zheng, D., & Shang, J. (2012). Theoretical investigation of asymmetric simple exclusion processes with off-ramp on the boundaries. Modern Physics Letters B. 26(24)
[Journal article]Authored by: Tang, L.
von Lande, RGK., Worth, AJ., Peckitt, NS., Cave, NJ., & Tang, L. (2012). Rapid prototype modeling and customized titanium plate fabrication for correction of a persistent hard palate defect in a dog. Journal of the American Veterinary Medical Association. 240(11), 1316-1322
[Journal article]Authored by: Cave, N., Tang, L., Worth, A.
Xiao, S., Tang, L., & Wang, H. (2011). The zone strong coupling two-channel totally asymmetric simple exclusion processes. Central European Journal of Physics. 9(4), 1077-1083
[Journal article]Authored by: Tang, L.
Henderson, MP., Tang, L., & Mukhopadhyay, S. (2008). Autonomous flying vehicle. Projects. 17, 74-79
[Journal article]Authored by: Mukhopadhyay, S., Tang, L.
Hayton, AA., & Tang, L. (2008). Design and Prototype Construction of A Prosthetic Right Hand. Projects. 17, 68-73
[Journal article]Authored by: Tang, L.
Bryant, MG., Tang, L., & Mukhopadhyay, S. (2008). Continuation of an all terrain walking robot (S.P.I.D.E.R). Projects. 17, 7-12
[Journal article]Authored by: Tang, L.
Fukuoka, M., & Tang, L. (2008). Reformer Internal Diameter Measuring System. Projects. 17, 49-54
[Journal article]Authored by: Tang, L.
Cameron, M., Tang, L., & Bailey, D. (2008). Invision calibration system. Projects. 17, 13-18
[Journal article]Authored by: Bailey, D., Tang, L.
Edmondson, MC., Tang, L., & Kern, A. (2008). Software development modules for microcontroller-based system. Advances in Science and Technology. 56(August), 45-51 Retrieved from http://www.ttp.net/
[Journal article]Authored by: Tang, L.
Gan, H., & Tang, L. (2007). Automatic livestock weight measurement and recording system journal. Projects. 16, 31-36
[Journal article]Authored by: Tang, L.
Wong, YW., Tang, L., Bailey, D., & Sen Gupta, G. (2007). Fuzzy state controller for a robot vision system. Projects. 16, 152-157
[Journal article]Authored by: Bailey, D., Sen Gupta, G., Tang, L.
White, JC., Tang, L., & De Silva, LC. (2007). Realtime remote sentry module. Projects. 16, 146-151
[Journal article]Authored by: Tang, L.
Edmondson, M., & Tang, L. (2006). Single person electric vehicle. Projects. 15, 46-52
[Journal article]Authored by: Tang, L.
King, PR., & Tang, L. (2006). Automated Guided Vehicle Design. Projects. 15, 105-109
[Journal article]Authored by: Tang, L.
Stokes, RJ., Tang, L., & Al-Bahadly, IA. (2006). SPARBOT-A Robotic Training Platform. 15, 255-259
[Journal article]Authored by: Tang, L.
Patel, H., & Tang, L. (2006). Tissue cutter equipment. Projects. 15, 215-220
[Journal article]Authored by: Tang, L.
Murphy, SD., & Tang, L. (2006). PC-based CNC mill. Projects. 15, 199-204
[Journal article]Authored by: Tang, L.
McCready, M., & Tang, L. (2006). All Terrain Walking Robot. Projects. 15, 185-191
[Journal article]Authored by: Tang, L.
Karam, JA., & Tang, L. (2006). Beermaster-Service Robot. Projects. 15, 101-104
[Journal article]Authored by: Tang, L.
Markham, LW., & Tang, L. (2006). Intelligent Marker Vehicle. Projects. 15, 171-175
[Journal article]Authored by: Tang, L.
Stokes, R., Tang, L., & Al Bahadly, IH. (2006). SPARBOT - A robotic training platform. Projects. 15, 255-259
[Journal article]Authored by: Al-Bahadly, I., Tang, L.
Christian, LR., & Tang, L. (2005). CNC plasma cutter using PC based control. Projects. 14, 32-37
[Journal article]Authored by: Tang, L.
Orchard, K., & Tang, L. (2005). Unmanned light craft balance system using fuzzy logic control. Projects: Project Papers by the Final-Year Students of the Bachelor of Engineering and Bachelor of Technology December 2005. 14, 102-107
[Journal article]Authored by: Tang, L.
Tang, L., & Christian, LR. (2005). CNC plasma cutter using PC based control. Projects: Project Papers by the Final-Year Students of the Bachelor of Engineering and Bachelor of Technology December 2005. 14, 32-37
[Journal article]Authored by: Tang, L.
Bullin, RI., & Tang, L. (2005). The next generation washing machines. Projects: Project Papers by the Final-Year Students of the Bachelor of Engineering and Bachelor of Technology December 2005. 14, 22-26
[Journal article]Authored by: Tang, L.
McCarthy, JP., & Tang, L. (2004). Mechatronic tissue slicing device. Projects. 13, 103-106
[Journal article]Authored by: Tang, L.
Curd, JR., & Tang, L. (2003). Mechatronics display assembly. Projects. 12, 42-45
[Journal article]Authored by: Tang, L.
Mayhead, D., & Tang, L. (2002). Radio controlled miniature hot air balloon product. Projects. 11, 124-128
[Journal article]Authored by: Tang, L.
Isaachsen, T., & Tang, L. (2002). Boat design and manufacture using 3D modelling technology. Projects. 11, 98-103
[Journal article]Authored by: Tang, L.
Ma, WH., & Tang, L. (2000). The utilisation of CAD/CAM process in product development. Projects. 9, 86-91
[Journal article]Authored by: Tang, L.

Creative Work

Tang, L., & Janse van Vuuren, J. (2017). Multiple Configuration Shell-Core Structured Robotic Manipulator with Interchangeable Mechatronic Joints [Artefact]. : Massey University
[Artefact]Authored by: Tang, L.

Conference

Riley, CB., Colborne, G., Greaves, A., Dodd, S., Tessier, A., Beausoleio, N., . . . Tang, L. (2017). Equine behavioural and biomechanical responses to trailer transport and braking. Poster session presented at the meeting of 33rd world veterinary congress
[Conference Poster]Authored by: Colborne, G., Riley, C., Sano, H., Tang, L.
Nguyen, TPV., Tang, L., Nguyen, DM., Hasan, F., & Mukhopadhyay, S. (2017). Extra Wide Band 3D Patch Antennae System Design for Remote Vital Sign Doppler Radar Sensor Detection. Proceedings of 2017 Eleventh International Conference on Sensing Technology. : 2017 Eleventh International Conference on Sensing Technology (ICST)
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Tang, L., Fukuoka, M., Huggins, B., & Potgieter, J.Integrated mechatronic system for reformer tube internal geometric distortion inspection. International Conference on Advanced Mechatronic Systems, ICAMechS. (pp. 443 - 448). 2325-0682.
[Conference]Authored by: Potgieter, J., Tang, L.
Tang, L., Tennant, JK., Forster, A., & Reddy, M. (2016). Acetabular cup seating impact sensing for press-fit acetabular cup fixation. Proceeding of IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications 2016. (pp. 1 - 6). IEEE Xplore: MESA 2016-12th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA)
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Tang, L., Fukuoka, M., Huggins, B., & Potgieter, J. (2017). Integrated Mechatronic System for Reformer Tube Internal Geometric Distortion Inspection. Proceedings of the 2016 International Conference on Advanced Mechatronic Systems. (pp. 443 - 448). : 2016 International Conference on Advanced Mechatronic Systems
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Tang, L., Tennant, JK., Forster, A., & Reddy, M.Acetabular cup seating impact sensing for press-fit acetabular cup fixation. MESA 2016 - 12th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications - Conference Proceedings.
[Conference]Authored by: Tang, L.
Wang, J., Tang, L., Bronlund, JE., & IEEE, .A Pattern Recognition System for Myoelectric Based Prosthesis Hand Control. PROCEEDINGS OF THE 2015 10TH IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS. (pp. 846 - 850). 2156-2318.
[Conference]Authored by: Bronlund, J., Tang, L.
Wang, J., Tang, L., & Bronlund, JE. (2015). A pattern recognition system for myoelectric based prosthesis hand control. Proceedings of the 2015 10th IEEE Conference on Industrial Electronics and Applications, ICIEA 2015. (pp. 830 - 834).
[Conference Paper in Published Proceedings]Authored by: Bronlund, J., Tang, L.
Gui, P., Tang, L., & Mukhopadhyay, S. (2015). A novel design of anti-falling mechanism for tree pruning robot. Proceedings of the 2015 10th IEEE Conference on Industrial Electronics and Applications, ICIEA 2015. (pp. 812 - 816).
[Conference Paper in Published Proceedings]Authored by: Mukhopadhyay, S., Tang, L.
Gui, P., Tang, L., & Mukhopadhyay, S. (2015). MEMS based IMU for tilting measurement: Comparison of complementary and kalman filter based data fusion. Proceedings of the 2015 10th IEEE Conference on Industrial Electronics and Applications, ICIEA 2015. (pp. 2004 - 2009).
[Conference Paper in Published Proceedings]Authored by: Mukhopadhyay, S., Tang, L.
Corpe, S., Tang, L., & Abplanalp, P. (2014). GPS-Guided Modular Design Mobile Robot Platform for Agricultural Applications. Proceedings of the 2013 Seventh International Conference on Sensing Technology (ICST). : IEEE - 2013 Seventh International Conference on Sensing Technology (ICST)
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Scott, C., Tang, L., & Gupta, GS. (2013). Bio-robotic system using bio-metric signals. Proceedings of the International Conference on Sensing Technology, ICST. (pp. 811 - 815).
[Conference Paper in Published Proceedings]Authored by: Sen Gupta, G., Tang, L.
Tsai, S., Mukhopadhyay, SC., Tang, L., & Chang, JY. (2012). Control and monitoring system for single motor driven 2-axis progressive metal stamping transfer system. ?. : 2012 The 3rd International Conference on Mechanic Automation and Control Engineering (MACE 2012)
[Conference Paper in Published Proceedings]Authored by: Mukhopadhyay, S., Tang, L.
Tsai, S., Mukhopadhyay, SC., Tang, L., & Chang, J. (2012). Control and monitoring system for single motor driven 2-axis progressive metal stamping transfer system. MACE '12 Proceedings of the 2012 Third International Conference on Mechanic Automation and Control Engineering. (pp. 3252 - 3255). United States of America: The 3rd International Conference on Mechanic Automation and Control Engineering (MACE 2012)
[Conference Paper in Published Proceedings]Authored by: Mukhopadhyay, S.Contributed to by: Tang, L.
Jones, M., Bailey, D., & Tang, L. (2012). Vision system and calibration for pipe inspection. 2012 19th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2012. (pp. 179 - 183).
[Conference Paper in Published Proceedings]Authored by: Bailey, D., Tang, L.
Jones, M., Bailey, D., & Tang, L. (2012). Prototype of high speed pipe inspection robot. 2012 19th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2012. (pp. 173 - 178).
[Conference Paper in Published Proceedings]Authored by: Bailey, D., Tang, L.
Jones, M., Bailey, D., & Tang, L. (2012). Prototype of high speed pipe inspection robot. Mechatronics and Machine Vision in Practice (M2VIP), 2012 19th International Conference. (pp. 173 - 178). : 19th International Conference on Mechatronics and Machine Vision in Practice
[Conference Paper in Published Proceedings]Authored by: Bailey, D., Tang, L.
Kioumars, AH., & Tang, L. (2011). Wireless network for health monitoring: Heart rate and temperature sensor. Proceedings of the International Conference on Sensing Technology, ICST. (pp. 362 - 369).
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Bailey, D., Jones, M., & Tang, L. (2011). Real time vision for measuring pipe erosion. ICARA 2011 - Proceedings of the 5th International Conference on Automation, Robotics and Applications. (pp. 486 - 491).
[Conference Paper in Published Proceedings]Authored by: Bailey, D., Tang, L.
Kioumars, AH., & Tang, L. (2011). ATmega and XBee-based wireless sensing. ICARA 2011 - Proceedings of the 5th International Conference on Automation, Robotics and Applications. (pp. 351 - 356).
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Fukuoka, M., & Tang, L. (2011). Wireless pipe inspection control system. ICARA 2011 - Proceedings of the 5th International Conference on Automation, Robotics and Applications. (pp. 497 - 502).
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Tang, L., & Donnelly, C. (2011). Well casing mechatronic checking system. ICARA 2011 - Proceedings of the 5th International Conference on Automation, Robotics and Applications. (pp. 492 - 496).
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Tang, L., Hayton, AA., Brunette, E., Roldan, J., Quazi, T., & Zhou, J. (2011). Prosthetic hand with a simple driving system. IEEE Conference on Robotics, Automation and Mechatronics, RAM - Proceedings. (pp. 208 - 213).
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Tang, L., & Markham, LW.Microcontroller-based paint marking system. : 15th International Conference on Mechatronics Technology
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Tang, L., Fukuoka, M., & Tait, P. (2011). Mechanical sensing for reformer internal diameter data capturing. Proceedings of the ASME Design Engineering Technical Conference. Vol. 3 (pp. 511 - 516).
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Tang, L., Fukuoka, M., & Tait, P. (2011). Microcontroller-based reformer tube internal diameter data acquisition. Proceedings of the ASME Design Engineering Technical Conference. Vol. 3 (pp. 517 - 523).
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Edmondson, MC., & Tang, L.Vision processing for position based visual servo control of spherical objects. IPCV 2011. Vol. IIUnited States of America: Proceedings of the 2011 International Conference on Image Processing Computer Vision and Pattern Recognition
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Li, Y., & Tang, L.Parametric Model of human lower jaw. (pp. 430 - 433). : 2010 First International Conference on Cellular Molecular Biology Biophysics and Bioengineering
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Al Bahadly, I., Stokes, R., & Tang, L. (2009). The design and control of an automatic sport apparatus. International Conference on Communication Computer and Power '09 Proceedings. (pp. 44 - 49).
[Conference Paper in Published Proceedings]Authored by: Al-Bahadly, I., Tang, L.
Huang, L., & Tang, L. (2008). Dynamic target tracking control for a wheeled mobile robot constrained by limited imputs. Proceedings of the 17th International Federation of Automatic Control World Congress 2008. (pp. 3087 - 3091). : The 17th World Congress The International Federation of Automatic Control
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Bailey, DG., Wong, YW., & Tang, L. (2008). Hierarchical fuzzy state controller for robot vision. Poster session presented at the meeting of Robot Vision: 2nd International Workshop (RobVis 2008). Auckland, NZ
[Conference Poster]Authored by: Bailey, D., Tang, L.
Bailey, D., Wong, YW., & Tang, L. (2008). Hierarchical fuzzy state controller for robot vision. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Vol. 4931 LNCS (pp. 391 - 402).
[Conference Paper in Published Proceedings]Authored by: Bailey, D., Tang, L.
Tang, L., & Virk, G. (2007). Integrated intelligent mechrobot system. In M. Xie, S. Dubowsky, J. Fontaine, MO. Tokhi, & GS. Virk (Eds.) Proceedings of 10th International Conference Advances in Climbing and Walking Robots (CLAWAR 2007). (pp. 670 - 679).
[Conference Paper in Published Proceedings]Authored by: Tang, L.
McCready, M., Tang, L., & Virk, G. (2007, July). Intelligent spider (Special Purpose Insectoid Drive Experimental Rover) walking robot for rough terrain. . Singapore.
[Conference Oral Presentation]Authored by: Tang, L.
Edmondson, MC., & Tang, L. (2007). Microcontroller modulated soft programming. In DA. Carnegie, & P. Teal (Eds.) Proceedings of the 14th Electronics New Zealand Conference (ENZCon 2007). (pp. 189 - 194).
[Conference Paper in Published Proceedings]Authored by: Tang, L.
White, J., Tang, L., & De Silva, CD. (2007). Realtime remote sentry module. In SC. Mukhopadhyay, CH. Messom, L. De Silva, & G. Sen Gupta (Eds.) Proceedings of the 4th International Conference on Computational Intelligence, Robotics and Autonomous Systems. (pp. 14 - 18).
[Conference Paper in Published Proceedings]Authored by: Tang, L.
McCready, M., Tang, L., & Virk, G. (2007). Intelligent SPIDER walking robot for rough terrain. Advances in Climbing and Walking Robots - Proceedings of 10th International Conference, CLAWAR 2007. (pp. 161 - 168).
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Tang, L., & Virk, GS.Integrated intelligent MechRobot system.
[Conference Oral Presentation]Authored by: Tang, L.
Wong, YW., Tang, L., & Bailey, D. (2007). Vision system for a robot guide system. In SC. Mukhopadhyay, CH. Messom, L. De Silva, & G. Sen Gupta (Eds.) Proceedings of the 4th International Conference on Computational Intelligence, Robotics and Autonomous Systems. (pp. 337 - 341). New Zealand: 4th International Conference on Computational Intelligence, Robotics and Autonomous Systems
[Conference Paper in Published Proceedings]Authored by: Bailey, D., Tang, L.
Stokes, R., Al Bahadly, IH., & Tang, L. (2007). An automatic training apparatus for martial arts and boxing application. In SC. Mukhopadhyay, CH. Messom, L. De Silva, & G. Sen Gupta (Eds.) Proceedings of the 4th International Conference on Computational Intelligence, Robotics and Autonomous Systems. (pp. 110 - 115).
[Conference Paper in Published Proceedings]Authored by: Al-Bahadly, I., Tang, L.
Stokes, R., Tang, L., & Al-Bahadly, I. (2007). SparBot - A robotic focus mitt training platform. Advances in Climbing and Walking Robots - Proceedings of 10th International Conference, CLAWAR 2007. (pp. 744 - 751).
[Conference Paper in Published Proceedings]Authored by: Al-Bahadly, I., Tang, L.
Zong, H., & Tang, L. (2006). Heuristic algorithms for machine-operator coupling problems. 36th International Conference on Computers and Industrial Engineering, ICC and IE 2006. (pp. 2538 - 2549).
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Tang, L., Wishart, A., & Orchard, K. (2005). Microcontroller-based autonomous light craft. (pp. 123). , Tencon 2005: IEEE Region 10 Conference Hawthorn, VIC: Swinburne Press
[Conference Abstract]Authored by: Tang, L.
Tang, L., Orchard, K., & Wishart, A. (2005). Unmanned light craft balance system using fuzzy logic control. (pp. 90). , Tencon 2005: IEEE Region 10 Conference Hawthorn, VIC: Swinburne Press
[Conference Abstract]Authored by: Tang, L.
Tang, L., Wishart, A., & Orchard, K.Microcontroller-based autonomous light craft.
[Conference Oral Presentation]Authored by: Tang, L.
Tang, L., Orchard, K., & Wishart, A. (2005, November). Unmanned light craft balance system using fuzzy logic control. Presented at Tencon 2005 - 2005 IEEE Region 10. Melbourne, VIC.
[Conference Oral Presentation]Authored by: Tang, L.
Zong, H., Yu, WQ., & Tang, L. (2004). Service level improvement of a customer service center. In MI. Dessouky, Y. Dessouky, M. Patel, & JT. Eds (Eds.) Proceedings of the 34th International Conference on Computers and Industrial Engineering. (pp. unpaged). San Jose, CA
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Tang, L., Rodgers, MP., & Zong, H. (2004). Reconfigurable mechatronic system. PCMM'2004: Eighth International Conference on Manufacturing and Management: Operations Management and Advanced Technology: Integration for Success: Proceedings. (pp. 549 - 555). Box Hill, VIC
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Tang, L., & Collins, CR. (2004). Ribbed saw blade design using CAD/CAM/CAE. PCMM'2004: Eighth International Conference on Manufacturing and Management: Operations Management and Advanced Technology: Integration for Success: Proceedings. (pp. 541 - 548). Box Hill, VIC
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Tang, L., & Rodgers, MP. (2004). Industrial-oriented mechatronics. World Congress on Engineering and Technology Education 2004: Engineering Education in the Changing Society. (pp. 218 - 222). Guaruja/Santos, Brazil
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Tang, L., Ball, RG., & Mercer, KA. (2004). Computer-aided design in first year robot design competition. World Congress on Engineering and Technology Education 2004: Engineering Education in the Changing Society. (pp. 214 - 217). Guaruja/Santos, Brazil
[Conference Paper in Published Proceedings]Authored by: Mercer, K., Tang, L.
Tang, L., Kirk, S., Lam, YS., Brown, GD., McCauley, D., Wiggins, JR., . . . Foo, P. (2000, September). Networked design and manufacturing education centre. Presented at 6th International Conference on Manufacturing. Detroit, MI.
[Conference Oral Presentation]Authored by: Tang, L.
Riley, CB., colborne, G., Greaves, A., Dodd, S., Tessier, A., Beausoleil, N., . . . Tang, L. (2017). Equine behavioural and biomechanical responses to trailer transport and braking. Proceedings 33rd world veterinary congress.
[Conference Paper in Published Proceedings]Authored by: Colborne, G., Riley, C., Tang, L.
Gui, P., Tang, L., & Mukhopadhyay, S. (2017). Anti-falling tree climbing mechanism optimization. 2017 2nd Asia-Pacific Conference on Intelligent Robot Systems, ACIRS 2017. (pp. 284 - 288).
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Scott, C., Gupta, GS., & Tang, L. (2014). Sensing and processing of bio-metric signals for use in low cost bio-robotic systems. 2014 IEEE Sensors Applications Symposium, SAS 2014 - Proceedings. (pp. 283 - 288).
[Conference Paper in Published Proceedings]Authored by: Sen Gupta, G., Tang, L.Edited by: Tang, L.
Edmondson, MC., & Tang, L. (2011). Vision processing for position based visual servo control of spherical objects. Proceedings of the 2011 International Conference on Image Processing, Computer Vision, and Pattern Recognition, IPCV 2011. Vol. 2 (pp. 713 - 719).
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Edmondson, MC., Tang, L., & Kern, A. (2008). Software development modules for microcontroller-based system. CIMTEC 2008 - Proceedings of the 3rd International Conference on Smart Materials, Structures and Systems - Embodying Intelligence in Structures and Integrated Systems. Vol. 56 (pp. 45 - 51).
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Tang, L., Wishart, A., & Orchard, K. (2006). Microcontroller-based autonomous light craft. TENCON 2005 - 2005 IEEE REGION 10 CONFERENCE, VOLS 1-5. (pp. 2308 - 2312). : IEEE Region 10 Conference (TENCON 2005)
[Conference Paper in Published Proceedings]Authored by: Tang, L.
Tang, L., Orchard, K., & Wishart, A. (2006). Unmanned light craft balance system using fuzzy logic control. TENCON 2005 - 2005 IEEE REGION 10 CONFERENCE, VOLS 1-5. (pp. 1509 - 1513). : IEEE Region 10 Conference (TENCON 2005)
[Conference Paper in Published Proceedings]Authored by: Tang, L.

Supervision and Teaching

Summary of Doctoral Supervision

Position Current Completed
Supervisor 6 1
CoSupervisor 1 1

Current Doctoral Supervision

Supervisor of:

CoSupervisor of:

  • Alienor Bardin - PhD
    Predicting limb responses to surface variations with a 3D musculoskeletal model

Completed Doctoral Supervision

CoSupervisor of:

  • 2004 - Mr Goran Colak - PhD
    A Distributed Shop Floor Control System Based on the Principles of Heterarchical Control and Multi Agent Paradigm.

Massey Contact Centre Mon - Fri 8:30am to 5:00pm 0800 MASSEY (+64 6 350 5701) TXT 5222 contact@massey.ac.nz Web chat Staff Alumni News Māori @ Massey