Journal
Harris, M., Potgieter, J., Ray, S., Archer, R., & Arif, KM. (2019). Preparation and characterization of thermally stable ABS/HDPE blend for fused filament fabrication.
Materials and Manufacturing Processes.
[Journal article]Authored by: Archer, R., Arif, K., Potgieter, J.Read Online:
Read Abstract:
Wilson, S., Potgieter, J-G., & Arif, K. (2019). Robot-assisted floor surface profiling using low-cost sensors.
Remote Sensing. 11(22),
[Journal article]Authored by: Arif, K., Potgieter, J.Read Online:
Read Abstract:
Saleem, MH., Potgieter, J., & Arif, KM. (2019). Plant disease detection and classification by deep learning.
Plants. 8(11)
[Journal article]Authored by: Arif, K., Potgieter, J.Read Online:
Read Abstract:
Harris, M., Potgieter, J., Archer, R., & Arif, KM. (2019). Effect of material and process specific factors on the strength of printed parts in fused filament fabrication: A review of recent developments.
Materials. 12(10)
[Journal article]Authored by: Archer, R., Arif, K., Potgieter, J.Read Online:
Read Abstract:
Harris, M., Potgieter, J., Archer, R., & Arif, KM. (2019). In-process thermal treatment of polylactic acid in fused deposition modelling.
Materials and Manufacturing Processes. 34(6), 701-713
[Journal article]Authored by: Archer, R., Arif, K., Potgieter, J.Read Online:
Read Abstract:
view more...
Sodavaram, NK., McCormick, D., Alam, F., Potgieter, J., Budgett, DM., & Arif, KM. (2019). Modeling, simulation and experimental validation of fatigue behavior of thin-film titanium membranes: For chronic intracranial pressure monitoring.
Microsystem Technologies. 25(9), 3489-3501
[Journal article]Authored by: Alam, F., Arif, K., Potgieter, J.Read Online:
Read Abstract:
Sizeland, KH., Hofman, KA., Hallett, IC., Martin, DE., Potgieter, J., Kirby, NM., . . . Cumming, MH. (2018). Nanostructure of electrospun collagen: Do electrospun collagen fibers form native structures?.
Materialia. 3, 90-96
[Journal article]Authored by: Haverkamp, R., Potgieter, J.Read Online:
Read Abstract:
Whyman, S., Arif, KM., & Potgieter, J. (2018). Design and development of an extrusion system for 3D printing biopolymer pellets.
International Journal of Advanced Manufacturing Technology. 96(9-12), 3417-3428
[Journal article]Authored by: Arif, K., Potgieter, J.Read Online:
Read Abstract:
Ferreira, A., Arif, KM., Dirven, S., & Potgieter, J. (2017). Retrofitment, open-sourcing, and characterisation of a legacy fused deposition modelling system.
International Journal of Advanced Manufacturing Technology. 90(9-12), 3357-3367
[Journal article]Authored by: Arif, K., Potgieter, J.Read Online:
Read Abstract:
Brooks, BJ., Arif, KM., Dirven, S., & Potgieter, J. (2017). Robot-assisted 3D printing of biopolymer thin shells.
International Journal of Advanced Manufacturing Technology. 89(1-4), 957-968
[Journal article]Authored by: Arif, K., Potgieter, J.Read Online:
Read Abstract:
Thomas, DB., Hiscox, JD., Dixon, BJ., & Potgieter, J. (2016). 3D scanning and printing skeletal tissues for anatomy education.
Journal of Anatomy. 229(3), 473-481
[Journal article]Authored by: Potgieter, J., Thomas, D.Read Online:
Read Abstract:
Jing, C., Potgieter, J., & Noble, FK. (2015). A colour detection and connected-objects separation methodology for VEX robotics.
Advances in Intelligent Systems and Computing. 345, 391-399
[Journal article]Authored by: Noble, F., Potgieter, J.Read Online:
Read Abstract:
Singh, J., Potgieter, J., & Xu, W. (2014). Fibre optic force sensor for flexible bevel tip needles in minimally invasive surgeries.
International Journal of Biomechatronics and Biomedical Robotics. 2(2/3/4), 135-140
[Journal article]Authored by: Potgieter, J.Edited by: Potgieter, J.Read Online:
Read Abstract:
Xu, P., Moir, T., Potgieter, J., & Alam, F. (2014). Editorial.
International Journal of Computer Applications in Technology. 50(1-2), 1-2
[Journal article]Authored by: Alam, F., Potgieter, J.Xu, P., Moir, TJ., Potgieter, J., & Alam, F. (2014). Editorial.
International Journal of Intelligent Systems Technologies and Applications. 13(1-2), 1-2
[Journal article]Authored by: Alam, F., Potgieter, J.Fang, FC., Xu, WL., Lin, KC., Alam, F., & Potgieter, J. (2013). Matsuoka neuronal oscillator for traffic signal control using agent-based simulation.
Procedia Computer Science. 19, 389-395
[Journal article]Authored by: Alam, F., Potgieter, J.Read Online:
Read Abstract:
Pham, VC., Alam, F., Potgieter, J., Fang, FC., & Xu, WL. (2013). Integrated fuzzy signal and ramp-metering at a diamond interchange.
Journal of Advanced Transportation. 47(4), 413-434
[Journal article]Authored by: Alam, F., Potgieter, J.Read Online:
Read Abstract:
Diegel, O., Withell, A., de Beer, D., Potgieter, J., & Noble, F. (2012). Low-cost 3D printing of controlled porosity ceramic parts.
International Journal of Automation Technology. 6(5), 618-626
[Journal article]Authored by: Noble, F., Potgieter, J.Read Abstract:
Potgieter, J., Diegel, O., Noble, F., & Pike, M. (2012). Additive manufacturing in the context of hybrid flexible manufacturing systems.
International Journal of Automation Technology. 6(5), 627-632
[Journal article]Authored by: Noble, F., Potgieter, J.Read Abstract:
Singh, J., Potgieter, J., & Xu, WL. (2012). Ovine automation: Robotic brisket cutting.
Industrial Robot. 39(2), 191-196
[Journal article]Authored by: Potgieter, J.Read Online:
Read Abstract:
Noble, FK., Alam, F., Potgieter, J., & Xu, WL. (2010). Energy harvesting and current state of the technology with application to traffic monitoring.
International Journal of Computer Applications in Technology. 39(1-3), 166-175
[Journal article]Authored by: Alam, F., Noble, F., Potgieter, J.Read Online:
Read Abstract:
Xu, W., Moir, TJ., Potgieter, J., & Alam, F. (2010). Editorial.
International Journal of Intelligent Systems Technologies and Applications. 8(1-4), 1-2 Retrieved from http://www.inderscience.com/editorials/f115108341291627.pdf
[Journal article]Authored by: Alam, F., Potgieter, J.Xu, WL., Clara Fang, F., Bronlund, J., & Potgieter, J. (2009). Generation of rhythmic and voluntary patterns of mastication using Matsuoka oscillator for a humanoid chewing robot.
Mechatronics. 19(2), 205-217
[Journal article]Authored by: Bronlund, J., Potgieter, J.Read Online:
Read Abstract:
Xu, WL., Bronlund, JE., Potgieter, J., Foster, KD., Röhrle, O., Pullan, AJ., . . . Kieser, JA. (2008). Review of the human masticatory system and masticatory robotics.
Mechanism and Machine Theory. 43(11), 1353-1375
[Journal article]Authored by: Bronlund, J., Potgieter, J.Read Online:
Read Abstract:
Xu, WL., Torrance, JD., Chen, BQ., Potgieter, J., Bronlund, JE., & Pap, JS. (2008). Kinematics and experiments of a life-sized masticatory robot for characterizing food texture.
IEEE Transactions on Industrial Electronics. 55(5), 2121-2132
[Journal article]Authored by: Bronlund, J., Potgieter, J.Read Online:
Read Abstract:
Xu, WL., Kuhnert, L., Foster, K., Bronlund, J., Potgieter, J., & Diegel, O. (2007). Object-oriented knowledge representation and discovery of human chewing behaviours.
Engineering Applications of Artificial Intelligence. 20(7), 1000-1012
[Journal article]Authored by: Bronlund, J., Potgieter, J.Read Online:
Read Abstract:
Diegel, O., Xu, WL., & Potgieter, J. (2006). A case study of Rapid Prototype as Design in educational engineering projects.
International Journal of Engineering Education. 22(2), 350-358
[Journal article]Authored by: Potgieter, J.Read Abstract:
Diegel, O., Bright, G., & Potgieter, J. (2005). Customized mass-manufacturing: Low cost, radio frequency, node based indoor tracking networks.
The International Journal of Ingenium. , 423-430
[Journal article]Authored by: Potgieter, J.Warren, G., & Potgieter, J. (2004). The intelligent robotic wheelchair.
Projects: Project Papers by the Final-Year Students of the Bachelor of Engineering and Bachelor of Technology. 13, 198-202
[Journal article]Authored by: Potgieter, J.Fan Chiang, S., & Potgieter, J. (2004). Advance mechatronic control of an industrial robot.
Projects: Project Papers by the Final-Year Students of the Bachelor of Engineering and Bachelor of Technology. 13, 42-47
[Journal article]Authored by: Potgieter, J.Diegel, O., Bright, G., & Potgieter, J. (2004). Bluetooth ubiquitous networks: Seamlessly integrating humans and machines.
Assembly Automation. 24(2), 168-176
[Journal article]Authored by: Potgieter, J.Read Online:
Read Abstract:
Tlale, NS., Potgieter, J., & Bright, G. (2003). Wireless tele-operated mechatronic control system for camera platform positioning.
Industrial Robot. 30(2), 177-183
[Journal article]Authored by: Potgieter, J.Read Online:
Read Abstract:
view less...
Conference
Pereira, T., Kennedy, JV., & Potgieter, J.A comparison of traditional manufacturing vs additive manufacturing, the best method for the job.
Procedia Manufacturing. (pp. 11 - 18).
[Conference]Authored by: Potgieter, J.Read Online:
Read Abstract:
Schutte, J., Wijisundira, P., Harris, M., & Potgieter, J.Evaluation of the effects of controlled ultrasonic acetone vaporisation on Fused Deposition Modelling 3D Printed Acrylonitrile Butadiene Styrene.
Proceedings of the 2018 25th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2018.
[Conference]Authored by: Potgieter, J.Read Online:
Read Abstract:
Schutte, J., Leveneur, J., Yuan, X., & Potgieter, J.Evaluation of the effects of corona discharge plasma exposure proximity to Fused Deposition Modelling 3D Printed Acrylonitrile Butadiene Styrene.
Proceedings of the 2018 25th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2018.
[Conference]Authored by: Potgieter, J.Read Online:
Read Abstract:
Pereira, T., Potgieter, J., Kennedy, JV., Mukhtar, A., & Fry, M.The effect of reheating layers in Metal Additive Manufacturing on the external surface finish of a printed part.
Proceedings of the 2018 25th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2018.
[Conference]Authored by: Potgieter, J.Read Online:
Read Abstract:
Pereira, TM., Potgieter, J., & Kennedy, J.Development of Quality Management Strategies for 3D Printing Testing Methods - A Review.
Proceedings - 2017 4th Asia-Pacific World Congress on Computer Science and Engineering, APWC on CSE 2017. (pp. 224 - 231).
[Conference]Authored by: Potgieter, J.Read Online:
Read Abstract:
view more...
Jaywant, SA., Potgieter, J., & Arif, K. (2018). Characterization of Low Cost Fluidic Components for Biosensing Applications.
Proceedings - 2018 5th Asia-Pacific World Congress on Computer Science and Engineering, APWC on CSE 2018. (pp. 45 - 50).
[Conference Paper in Published Proceedings]Authored by: Arif, K., Potgieter, J.Read Abstract:
Harris, M., Potgieter, J., & Arif, KM. (2018). Enhancement of strength in OS printers and visual predictive approach for strength and ductility. , MaD for the Future 2018: The Second National Conference for Innovation in Manufacturing and Design
[Conference Abstract]Authored by: Arif, K., Potgieter, J.Mearns, C., Potgieter, J., Dirven, S., & Le Guen, MJ.Experimental analysis of the effectiveness of current modelling methods for SLS parameter determination.
2017 24th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2017. (pp. 1 - 5).
[Conference]Authored by: Potgieter, J.Read Online:
Read Abstract:
Schutte, J., Potgieter, J., Dirven, S., & Yuan, X.The effects of electrospinning collection surface modification on nylon 6-6 placement.
2017 24th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2017. (pp. 1 - 6).
[Conference]Authored by: Potgieter, J.Read Online:
Read Abstract:
Wjesundera, P., Schutte, J., & Potgieter, J.The effects of acetone vapour inter-layer processing on fused deposition modelling 3D printed acrylonitrile butadiene styrene.
2017 24th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2017. (pp. 1 - 8).
[Conference]Authored by: Potgieter, J.Read Online:
Read Abstract:
Kvalsvig, A., Yuan, X., Potgieter, J., & Cao, P.Analysing the tensile properties of 3D printed fibre reinforced thermoplastic composite specimens.
2017 24th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2017. (pp. 1 - 6).
[Conference]Authored by: Potgieter, J.Read Online:
Read Abstract:
Pereira, T., Potgieter, J., & Kennedy, JV.A fundamental study of 3D printing testing methods for the development of new quality management strategies.
2017 24th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2017. (pp. 1 - 6).
[Conference]Authored by: Potgieter, J.Read Online:
Read Abstract:
Schutte, J., Yuan, X., Dirven, S., & Potgieter, J.The opportunity of electrospinning as a form of additive manufacturing in biotechnology.
2017 24th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2017. (pp. 1 - 6).
[Conference]Authored by: Potgieter, J.Read Online:
Read Abstract:
Emerson, I., Potgieter, J., & Xu, WL.Evaluation of a prototype integrated robotic and virtual mirror therapy system for stroke rehabilitation.
2017 24th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2017. (pp. 1 - 6).
[Conference]Authored by: Potgieter, J.Read Online:
Read Abstract:
Gardner, AD., Potgieter, J., & Noble, FK.A review of commercially available exoskeletons' capabilities.
2017 24th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2017. (pp. 1 - 5).
[Conference]Authored by: Noble, F., Potgieter, J.Read Online:
Read Abstract:
Jing, C., Potgieter, J., Noble, F., & Wang, R.A comparison and analysis of RGB-D cameras' depth performance for robotics application.
2017 24th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2017. (pp. 1 - 6).
[Conference]Authored by: Potgieter, J., Wang, R.Read Online:
Read Abstract:
Jing, C., Potgieter, J., Noble, F., Wang, R., & IEEE, .A comparison and analysis of RGB-D cameras' depth performance for robotics application.
2017 24TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND MACHINE VISION IN PRACTICE (M2VIP). (pp. 149 - 154).
[Conference]Authored by: Noble, F., Potgieter, J., Wang, R.Gardner, AD., Potgieter, J., Noble, FK., & IEEE, .A Review of Commercially Available Exoskeletons' Capabilities.
2017 24TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND MACHINE VISION IN PRACTICE (M2VIP). (pp. 253 - 257).
[Conference]Authored by: Noble, F., Potgieter, J.Pereira, T., Potgieter, J., Kennedy, JV., & IEEE, .A fundamental study of 3D printing testing methods for the development of new quality management strategies.
2017 24TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND MACHINE VISION IN PRACTICE (M2VIP). (pp. 496 - 501).
[Conference]Authored by: Potgieter, J.Kvalsvig, A., Yuan, X., Potgieter, J., Cao, P., & IEEE, .Analysing the Tensile Properties of 3D Printed Fibre Reinforced Thermoplastic Composite Specimens.
2017 24TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND MACHINE VISION IN PRACTICE (M2VIP). (pp. 119 - 124).
[Conference]Authored by: Potgieter, J.Wjesundera, P., Schutte, J., Potgieter, J., & IEEE, .The effects of Acetone vapour inter-layer processing on Fused Deposition Modelling 3D Printed Acrylonitrile Butadiene Styrene.
2017 24TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND MACHINE VISION IN PRACTICE (M2VIP). (pp. 474 - 478).
[Conference]Authored by: Potgieter, J.Mearns, C., Potgieter, J., Dirven, S., Le Guen, MJ., & IEEE, .Experimental Analysis of the Effectiveness of Current Modelling Methods for SLS Parameter Determination.
2017 24TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND MACHINE VISION IN PRACTICE (M2VIP). (pp. 486 - 490).
[Conference]Authored by: Potgieter, J.Emerson, I., Potgieter, J., Xu, WL., & IEEE, .Evaluation of a Prototype Integrated Robotic and Virtual Mirror Therapy System for Stroke Rehabilitation.
2017 24TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND MACHINE VISION IN PRACTICE (M2VIP). (pp. 384 - 389).
[Conference]Authored by: Potgieter, J.Schutte, J., Potgieter, J., Dirven, S., Yuan, X., & IEEE, .The effects of electrospinning collection surface modification on nylon 6-6 placement.
2017 24TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND MACHINE VISION IN PRACTICE (M2VIP). (pp. 125 - 130).
[Conference]Authored by: Potgieter, J.Schutte, J., Yuan, X., Dirven, S., Potgieter, J., & IEEE, .The opportunity of Electrospinning as a form of Additive Manufacturing in Biotechnology.
2017 24TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND MACHINE VISION IN PRACTICE (M2VIP). (pp. 131 - 136).
[Conference]Authored by: Potgieter, J.Harris, M., Potgieter, J., Arif, K., & Archer, R. (2017). Large scale 3D printing: Feasibility of novel extrusion based process and requisite materials.
2017 24th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2017. Vol. 2017-December (pp. 1 - 6).
[Conference Paper in Published Proceedings]Authored by: Archer, R., Arif, K., Potgieter, J.Read Online:
Read Abstract:
Silver, K., Potgieter, J., Arif, K., & Archer, R. (2017). Opportunities and challenges for large scale 3D printing of complex parts.
2017 24th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2017. Vol. 2017-December (pp. 1 - 6).
[Conference Paper in Published Proceedings]Authored by: Archer, R., Arif, K., Potgieter, J.Read Online:
Read Abstract:
Wilson, S., Potgieter, J., & Arif, K. (2017). Floor surface mapping using mobile robot and 2D laser scanner.
2017 24th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2017. Vol. 2017-December (pp. 1 - 6).
[Conference Paper in Published Proceedings]Authored by: Arif, K., Potgieter, J.Read Online:
Read Abstract:
Wilson, H., Arif, KM., & Potgieter, J. (2017).
Retrofitment and optimization of a legacy FDM system for biopolymer 3D printing. Poster session presented at the meeting of MaD for the Future 2017: A National Conference for Innovation in Manufacturing and Design. ANZ Viaduct Events Centre, Auckland, New Zealand
[Conference Poster]Authored by: Arif, K., Potgieter, J.Harrid, M., Arif, KM., Potgieter, J., & Archer, RH. (2017).
Improving the rate of crystallization of Polylactic acid (PLA) on open source 3D printers. Poster session presented at the meeting of MaD for the Future 2017: A National Conference for Innovation in Manufacturing and Design. ANZ Viaduct Events Centre, Auckland, New Zealand
[Conference Poster]Authored by: Archer, R., Arif, K., Potgieter, J.Silver, K., Arif, KM., Archer, R., & Potgieter, J. (2017).
Large scale printing in the dairy industry. Poster session presented at the meeting of MaD for the Future 2017: A National Conference for Innovation in Manufacturing and Design. ANZ Viaduct Events Centre, Auckland, New Zealand
[Conference Poster]Authored by: Archer, R., Arif, K., Potgieter, J.Whyman, S., Arif, KM., & Potgieter, J. (2017).
Extrusion system for 3D printing from biopolymer pellets. Poster session presented at the meeting of MaD for the Future 2017: A National Conference for Innovation in Manufacturing and Design. ANZ Viaduct Events Centre, Auckland, New Zealand
[Conference Poster]Authored by: Arif, K., Potgieter, J.Ferreria, A., Arif, KM., & potgieter, . (2017, May). Investigation of the temporal spacing effect on fused deposition modelled part properties. Presented at
MaD for the Future 2017: A National Conference for Innovation in Manufacturing and Design. ANZ Viaduct Events Centre, Auckland, New Zealand.
[Conference Oral Presentation]Authored by: Arif, K., Potgieter, J.Potgieter, J., & Arif, KA. (2017, May). Massey University Centre for Additive Manufacturing: A Revolution in Design Engineering. Presented at
MaD for the Future 2017: A National Conference for Innovation in Manufacturing and Design. ANZ Viaduct Events Centre, Auckland, New Zealand.
[Conference Oral Presentation]Authored by: Arif, K., Potgieter, J.Kvalsvig, A., Yuan, X., Potgieter, J., & Cao, P.3D printing of fibre reinforced honeycomb structured composite materials.
M2VIP 2016 - Proceedings of 23rd International Conference on Mechatronics and Machine Vision in Practice.
[Conference]Authored by: Potgieter, J.Read Online:
Read Abstract:
Arif, KM., & Potgieter, J.Particle Image Velocimetry Study of Displacement Field in Granular Continua Under Axisymmetric Conditions.
PROCEEDINGS OF 2016 23RD INTERNATIONAL CONFERENCE ON MECHATRONICS AND MACHINE VISION IN PRACTICE (M2VIP). (pp. 339 - 344).
[Conference]Authored by: Arif, K., Potgieter, J.Tang, L., Fukuoka, M., Huggins, B., & Potgieter, J.Integrated mechatronic system for reformer tube internal geometric distortion inspection.
International Conference on Advanced Mechatronic Systems, ICAMechS. (pp. 443 - 448). 2325-0682.
[Conference]Authored by: Potgieter, J., Tang, L.Read Online:
Read Abstract:
Tubman, R., Potgieter, J., & Arif, KM. (2017). Efficient robotic SLAM by fusion of RatSLAM and RGBD-SLAM.
M2VIP 2016 - Proceedings of 23rd International Conference on Mechatronics and Machine Vision in Practice.
[Conference Paper in Published Proceedings]Authored by: Arif, K., Potgieter, J.Read Abstract:
Arif, KM., & Potgieter, J. (2017). Particle image velocimetry study of displacement field in granular continua under axisymmetric conditions.
M2VIP 2016 - Proceedings of 23rd International Conference on Mechatronics and Machine Vision in Practice.
[Conference Paper in Published Proceedings]Authored by: Arif, K., Potgieter, J.Read Online:
Read Abstract:
Emerson, I., Potgieter, J., & Xu, WL.Control implementation for an integrated robotic and virtual mirror therapy system for stroke rehabilitation.
2016 IEEE 14th International Workshop on Advanced Motion Control, AMC 2016. (pp. 479 - 485).
[Conference]Authored by: Potgieter, J.Read Online:
Read Abstract:
Wang, X., Potgieter, J., & Diegel, O.Development of jaw exoskeleton for rehabilitation of temporomandibular disorders.
Advances in Intelligent Systems and Computing. (pp. 775 - 784). 2194-5357.
[Conference]Authored by: Potgieter, J.Read Online:
Read Abstract:
Arif, KM., Potgieter, J., & Diegel, O. (2013). Simulation of nanoparticle enhanced diffraction grating biosensor using DDA.
4th International Conference on Photonics, ICP 2013 - Conference Proceeding. (pp. 265 - 267).
[Conference Paper in Published Proceedings]Authored by: Arif, K., Potgieter, J.Read Online:
Read Abstract:
Pham, CV., Xu, WL., Potgieter, J., Alam, F., Fang, FC., & Xu, WL. (2012). A probabilistic fuzzy logic traffic signal control for an isolated intersection.
2012 19th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2012. (pp. 304 - 308).
[Conference Paper in Published Proceedings]Authored by: Alam, F., Potgieter, J.Read Abstract:
Wang, X., Xu, P., Potgieter, J., & Diegel, O. (2012). Review of the biomechanics of TMJ.
2012 19th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2012. (pp. 381 - 386).
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Read Abstract:
Yu, XF., Xu, WL., Alam, F., Potgieter, J., & Fang, CF. (2012). Genetic fuzzy logic approach to local ramp metering control using microscopic traffic simulation.
2012 19th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2012. (pp. 290 - 297).
[Conference Paper in Published Proceedings]Authored by: Alam, F., Potgieter, J.Read Abstract:
Yu, XF., Xu, WL., Alam, F., Potgieter, J., & Fang, CF. (2012). Optimal coordination of networked motorway ramp meters.
2012 19th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2012. (pp. 355 - 363).
[Conference Paper in Published Proceedings]Authored by: Alam, F., Potgieter, J.Read Abstract:
Noble, FK., Potgieter, J., Diegel, O., & Xu, WL. (2012). Control architecture of an antagonistically actuated wearable assistive device.
2012 19th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2012. (pp. 425 - 430).
[Conference Paper in Published Proceedings]Authored by: Noble, F., Potgieter, J.Read Abstract:
Withell, A., Diegel, O., Grupp, I., Reay, S., De Beer, D., & Potgieter, J. (2012). Porous ceramic filters through 3D printing.
Innovative Developments in Virtual and Physical Prototyping - Proceedings of the 5th International Conference on Advanced Research and Rapid Prototyping. (pp. 313 - 318).
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Read Abstract:
Noble, FK., Potgieter, J., Xu, WL., & Chang, JY. (2011). Modeling and simulation of a bio-mimetic, antagonistically actuated, limb joint.
ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. Vol. 7 (pp. 1153 - 1158).
[Conference Paper in Published Proceedings]Authored by: Noble, F., Potgieter, J.Read Online:
Read Abstract:
Elbeltagi, R., Ben-Tal, A., Potgieter, J., & Chang, JY. (2011). In-process weighing systems.
ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. Vol. 7 (pp. 1113 - 1122).
[Conference Paper in Published Proceedings]Authored by: Ben-Tal, A., Potgieter, J.Read Abstract:
Diegel, O., grupp, I., Withell, A., Reay, S., Singamneni, S., de Beer, D., . . . potgieter, J.Porous Ceramic Filters through 3D Printing. : RAPDASA 2011, 12th International Conference on Rapid Product Development
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Noble, FK., Potgieter, J., & Xu, WL. (2011). Modelling and simulations of a central pattern generator controlled, antagonistically actuated limb joint.
Conference Proceedings - IEEE International Conference on Systems, Man and Cybernetics. (pp. 2898 - 2903).
[Conference Paper in Published Proceedings]Authored by: Noble, F., Potgieter, J.Read Abstract:
Noble, F., Potgieter, J., Xu, WLP., & Chang, J. (2011). Modeling and Simulation of an Antagonistically Actuated Limb Joint. (pp. 118 - 120). : 21st ASME Annual Conference on Information Storage & Processing Systems 2011
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Diegel, O., Withell, A., Reay, S., Singamneni, S., Potgieter, J., & Xu, WL. (2010). RAPID PROTOTYPE AS DESIGN: IMPROVING DEVELOPMENT SPEED IN ENGINEERING DESIGN PROJECTS. (pp. 1 - 8). : 25th International Conference of CAD/CAM, Robotics & Factories of the Future Conference
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Read Abstract:
Wang, XY., Xu, WL., Etzel, K., Potgieter, J., & Diegel, O. (2010). Mechanism design and analysis of a wearable device for rehabilitation of temporomandibular disorder.
2010 IEEE International Conference on Robotics and Biomimetics, ROBIO 2010. (pp. 1674 - 1679).
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Read Abstract:
El Beltagi, RO., Potgieter, J., & Ben Tal, A. (2010). High speed weighing systems.
Proceedings of the 25th International Conference of CAD/CAM, Robotics & Factories of the Future (CARs&FOF) 2010. (pp. 1 - 13).
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Read Abstract:
Diegel, O., Withell, A., Reay, S., Singamneni, SB., Potgieter, J., & Xu, W. (2010). Rapid prototype as design: Improving development speed in engineering design projects.
Proceedings of the 25th International Conference of CAD/CAM, Robotics and Factories of the Future (CARs&FOF), 2010. (pp. 1 - 8).
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Read Abstract:
Wang, X., Xu, W., Potgieter, J., & Diegel, O. (2010). A jaw exoskeleton for jaw motion disability rehabilitation: System conceiving and mechanism synthesis.
Proceedings of the 25th International Conference on CAD/CAM, Robotics and Factories of the Future (CARs&FOF), 2010. (pp. 1 - 12).
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Read Abstract:
Potgieter, J., Zyzalo, JR., Diegel, O., & Xu, WL. (2008). Layer curing for masked projection stereolithography: the effects of varying irradiance distributions.
15th International Conference on Mechatronics and Machine Vision in Practice, M2VIP'08. (pp. 604 - 609).
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Read Abstract:
Noble, FK., Alam, F., Potgieter, J., & Xu, WL. (2008). Energy harvesting and current state of the technology with application to traffic monitoring.
15th International Conference on Mechatronics and Machine Vision in Practice, M2VIP'08. (pp. 461 - 470).
[Conference Paper in Published Proceedings]Authored by: Alam, F., Noble, F., Potgieter, J.Read Online:
Read Abstract:
Alam, F., Potgieter, J., Moir, TJ., Diegel, O., & Xu, W.(2008). Proceedings of the 15th International Conference on Mechatronics and Machine Vision in Practice (M2VIP08). In
Proceedings of the 15th International Conference on Mechatronics and Machine Vision in Practice (M2VIP08). Massey University, Auckland, NZ
[Conference Other]Edited by: Alam, F., Potgieter, J.Diegel, O., Neitzert, T., Singh, D., Singamneni, S., Potgieter, J., Xu, WL., . . . Bright, G. (2007). Putting it all together: Rapid prototype as design.
Proceedings of the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping: Virtual and Rapid Manufacturing Advanced Research Virtual and Rapid Prototyping. (pp. 647 - 653).
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Read Abstract:
Xing, B., Eganza, J., Bright, G., & Potgieter, J. (2006). Reconfigurable manufacturing system for Agile manufacturing.
IFAC Proceedings Volumes (IFAC-PapersOnline). Vol. 12
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Read Abstract:
Xing, B., Bright, G., Tlale, NS., & Potgieter, J. (2006). Reconfigurable manufacturing systems for agile mass customized manufacturing. (pp. 473 - 482). : 22nd International Conference on CAD/CAM, Robotics and Factories of the Future
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Xing, B., Eganza, J., Bright, G., & Potgieter, J. (2006). Reconfigurable Manufacturing System for Agile Manufacturing. (pp. 487 - 492).
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Read Online:
Read Abstract:
Hasan, SM., & Potgieter, J. (2006). A novel CMOS sampled-data centre-of-mass tracker circuit for robotic visual feedback object tracking. In SC. Mukhopadhyay, & G. Sen Gupta (Eds.)
Proceedings of the 3rd International Conference on Autonomous Robots and Agents (ICARA 2006). (pp. 213 - 218).
[Conference Paper in Published Proceedings]Authored by: Hasan, S., Potgieter, J.Potgieter, J., Bright, G., Xu, P., & Tlale, NS. (2004). Integrated wireless network control for internet manufacturing processes. In D. Dimitrov, ND. Preez, & WVW. Eds (Eds.)
International Conference on Competitive Manufacturing: COMA '04: Progess in Innovative Manufacturing. (pp. 349 - 354). Stellenbosch, South Africa
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Bright, G., Tlale, NS., & Potgieter, J. (2004). Wireless mechatronic controller for tele-operated camera platform. In D. Dimitrov, ND. Preez, & WVW. Eds (Eds.)
International Conference on Competitive Manufacturing: COMA '04: Progess in Innovative Manufacturing. (pp. 343 - 348). Stellenbosch, South Africa
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Diegel, O., Potgieter, J., & Bright, G. (2004). The seamless integration of humans and machines using bluetooth communication. In MA. Marquez, & R. Ed (Eds.)
Proceedings of the 20th International Conference on CAD/CAM: Robotics and factories of the future. (pp. 221 - 229). San Cristobal, Venezuela
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Zyzalo, JR., Bright, G., Diegel, O., & Potgieter, J. (2004). Modular Mechatronic Robotic Plug-and-Play Controller.
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Vol. 3213 (pp. 225 - 231).
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Read Abstract:
Bright, G., Potgieter, J., Diegel, O., & Tlale, NS. (2003). Control of a domestic robot appliance via the internet using wireless LAN. In WARWH. Ed (Ed.)
19th International Conference on CAD/CAM, Robotics and Factories of the Future: Cars & FOF 2003. (pp. 653 - 660). Selangor, Malaysia
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Tlale, NS., Bright, G., Diegel, O., & Potgieter, J. (2003). Integrated mechatronic design of an inspection system for PCBs. In WARWH. Ed (Ed.)
19th International Conference on CAD/CAM, Robotics and Factories of the Future: Cars & FOF 2003. (pp. 443 - 454). Selangor, Malaysia
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Tlale, NS., Bright, G., & Potgieter, J. (2002). A low cost, flexible, modular designed apparatus for reverse engineering and inspection of PCBs. In JJPF. Ed (Ed.)
18th International Conference on CAD/CAM, Robotics and Factories of the Future. (pp. 545 - 554). Porto, Portugal
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Tlale, NS., Bright, G., Potgieter, J., & Xu, P. (2002). Mechatronic modular design of an apparatus for PC board inspection. In W. Friedrich, & PL. Eds (Eds.)
Australasian Conference on Robotics and Automation. (pp. 139 - 144). Auckland, NZ
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Potgieter, J., Bright, G., Diegel, O., & Tlale, S. (2002). Internet control of a domestic robot using wireless LAN.
Australasian Conference on Robotics and Automation (ACRA 2002) Conference. (pp. 212 - 215). Sydney, Australia
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Tlale, NS., Bright, G., & Potgieter, J. (2002). Mechatronic controller for tele-operated camera platform. In W. Friedrich, & PL. Eds (Eds.)
2002 Australasian Conference on Robotics and Automation. (pp. 48 - 53). Auckland, NZ
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Potgieter, J., Bright, G., & Tlale, S. (2002). Modular mechatronic control system for internet manufacturing. In JJPF. Ed (Ed.)
18th International Conference on CAD/CAM, Robotics and Factories of the Future. (pp. 529 - 536). Porto, Portugal
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Diegel, O., Badve, A., Bright, G., Potgieter, J., & Tlale, NS. (2002). Improved mecanum wheel design for omni-directional robots. In W. Friedrich, & PL. Eds (Eds.)
Australasian Conference on Robotics and Automation. (pp. 117 - 121). Auckland, NZ
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Bright, G., & Potgieter, J. (2001). Mechatronic internet based control system for computer integrated manufacturing processes. In D. Dimitrov, & NDDP. Eds (Eds.)
International Conference on Competitive Manufacturing: COMA 01. (pp. 354 - 360). Stellenbosch, South Africa
[Conference Paper in Published Proceedings]Authored by: Potgieter, J.Bright, G., & Potgieter, J.PC-based mechatronic robotic plug and play system for part assembly operations.
IEEE International Symposium on Industrial Electronics. (pp. 426 - 429).
[Conference]Authored by: Potgieter, J.Read Abstract:
view less...
